Frequently Asked Quesions
Where does the grease come from in a kitchen?
Large grease generators in the kitchen are the pre-rinse sinks and the pot-washing sinks. Grease comes from the food residue that is on used plates and cookware. The biggest generator of grease is the three-compartment sink, where a lot of the pots and pans are washed.
Surprisingly, very little grease comes from the dishwasher. Plates and cookware have grease and food residue scraped/rinsed off at the pre-rinse station before they go into the dishwasher. Any grease that does come out of a dishwasher is emulsified grease. Grease emulsifies due to the high concentration of detergents and high strength soaps that dishwashers utilise. Emulsified grease cannot be trapped.
Where should I install a Big-Dipper?
Install the Big Dipper as close as possible to the fixture(s) it is serving. The unit should be visible and easily accessible for daily maintenance and inspection. Do not install in a vault. For an overview on Big Dipper installation, click here. Additional information can be found in the manual.
How to reduce odour?
For best odor management, upgrade to the Big Dipper Advanced There are a few tips to help reduce odors from your existing Big Dipper.
(1) Daily Maintenance,
(2) Increase Water Intake,
(3) Add Bleach,
(4) Reduce Skim Cycle Time,
(5) Add grease or Oil,
For full information, click here.
What venting is required for a Trapzilla installation?
Vent the vessel vent to atmosphere to properly regulate airflow in and out of the Trapzilla tank. The outlet vent needs to be vented to the facility vent or code-approved vacuum breaker to prevent siphonage. Failure to properly vent outlet voids Thermaco's warranty. For Trapzilla installation overview, click here. Always refer to the manual for more instructions.
How can I get spec sheets for my project?
You can download them from our website or you can contact us at +44 1789 293 569
Click the appropriate link below to access specifications and drawings for our products.
Big Dipper
Trapzilla
What is a Grease Trap & How Does a Grease Trap Work?
To put it simply, a grease trap is a tank into which wastewater containing fat, oil (FOG) and grease flows through before entering a drainage system. The tank is designed to intercept or "trap" the FOG while allowing clear water to escape.